Neopost IJ 80 User Manual page 99

The machine is configured by default as follows:
- With 0000 code for all departments opened by the supervisor,
- With names from D1 to D49 corresponding to numbers 1 to 49
In the "no department" mode, all the values are assigned to a
dummy department (D0 MISCELLANEOUS) which cannot be
accessed by the user. This department will be reset with the other
ones, when the registers are cleared. This department appears
on the printed reports.
After selecting "DEPARTMENT" in the main supervisor menu,
the following menu will appear:
After selecting a department using the
(or by pressing the numeric key corresponding to the selection),
4128511G/B
04/04/2007
The system is supplied with DEPARTMENT
order to use the departments, select DEPARTMENT
(by touching it). Validate with
ON
then select DEPARTMENT in the main supervisor menu
to open and define the departments you want to use (see
on previous page).
for IJ 80, and from D1 to D199 corresponding to n° 1 to 199 for
IJ 90 and IJ 110.
DEPARTMENTS
DEPT MODE ON
1 MARKETING
2 DIRECTION
3 DESIGN
3 DESIGN
4 RESEARCH
5 D005
6 D12
7 D07
HOME LOGOUT
OK
REPOR... POSTA...
CLOSED
OPEN
OPEN
CLOSED
OPEN
OPEN
CLOSED
LOCKED
MODIFY SETUP
and
Supervisor Mode
ORIG0062-99
; in
OFF
. You should
SUP
OK
keys
99