Load Rate Table - Neopost IJ 80 User Manual

The time delays are determined by the supervisor (between 0 and
3600 seconds, with increments of 1 second) and are expressed
in seconds:
- START: the waiting time for the first document with the transport
- STOP: time-out before the machine stops after the last document
- STANDBY: the time period before the printhead returns to the
- SLEEP: the time period before the machine goes into sleep
- To load the rate table, select the "LOAD RATE TABLE" function
- Insert the memory card into the reader, on the right side of the
- Press
4128511G/B
04/04/2007
motor in operation (this is not settable with an autofeed attached).
is processed.
protection position, after the motor stops (advised value: 150 s).
mode after the printhead returns to the protection position
(advised value: 120 s).
To modify the "SLEEP" time, enter the desired time
(in seconds) using
to access to a numeric screen and enter the desired
precise value. Confirm with
When inserter mode is ON, the timeouts are maintained
but are not taken into account.

4.3.4 Load rate table

in the main supervisor menu.
machine.
to initiate the downloading operation.
OK
and keys, or touch
-
+
.
OK
Supervisor Mode
ORIG0062-95
0240
95