Dynamic Batch Mode; Operation With An External Weighing Platform; Standard Mode - Neopost IJ 80 User Manual

The user selects a postal product. Each mail piece is:
- Transported (one by one) from the feeder to the dynamic scale,
- Printed by the mailing machine at the corresponding value,
This mode allows to print a whole envelope series at the same
value, weighing only the first one.
After validation, the whole envelope series is printed at the
defined value, at the highest speed.
A new envelope is weighed each time the motor has stopped and
the

3.2 Operation with an external weighing platform

This function is used to print an envelop via the feeder and the path
of the mailing machine.
If you put any weight on the WP platform, the weight and amount
(depending on the current rate) are automatically displayed on the
screen.
If you remove the weight on the WP, the weight and amount will not
change, until an other weight is placed on the WP platform.
4128511G/B
04/04/2007
which sends the weight, the length, the over-size and the thickness
to the rate calculator;
calculated by the rate calculator.

3.1.3 Dynamic batch mode

This icon indicates that the dynamic batch mode
function is ON.
START
key is pressed.
STOP

3.2.1 Standard Mode

52 Using a scale
ORIG0062-52