Dynamic Scale High Accuracy Configuration Mode - Neopost IJ 80 User Manual

4.13 Dynamic scale high accuracy configuration mode

The "high accuracy" mode (H. A.) is used to improve weighing
accuracy. When this mode is not selected, the speed of the
system may be increased.
To enable or disable the "high accuracy" mode:
- From the main screen (in supervisor mode), press the
- Press the
4128511G/B
04/04/2007
To modify the name (except for "user rate") or the
characteristics of a predefined rate configuration, the
procedure is the same as in the user mode, followed by
pressing . Then the screen displays:
STORE
STORE RATE CONFIGURATION ?
Then, press
OK
key; the following screen will appear:
SCALE
DYNAMIC SCALE M..
1 DYNAMIC SCALE OFF
1 DYNAMIC SCALE OFF
2 DYNAMIC WEIGHING ON
3 DYNAMIC SCALE BATCH
HOME LOGOUT
key, the screen below then appears:
HI ACC
ORIG0062-109
.
DEFAU..
SUP
HI ACC DEFLT OK
Supervisor Mode 109