Passport 1000 PG
Mortise Lock
12
Installation Instructions - Gasket Installation (Optional)
Note: Optional, for non-fi re rated doors only.
For non-fi re rated door applications, an optional gasket (Figure 12) may be used as a weather seal between the
escutcheon and the outside door surface.
13
Installation Instructions - Installation of Outside Escutcheon and Mounting
Plate Assembly
1. Insert the mounting posts through holes as shown.
2. On the inside of the door, position the mounting plate over the indicated holes.
Note: Feed controller and keypad cables through side opening (Figure 13A).
1-800-727-5477 • www.sargentlock.com
Copyright © 2012, 2022, SARGENT Manufacturing Company. All rights reserved.
Reproduction in whole or in part without the express written permission of SARGENT Manufacturing
Company is prohibited. Patent pending and/or patent www.assaabloydss.com/patents.
Peel off adhesive
backing and attach to
(outside) escutcheon
Figure 12
Mounting Plate
Cables
Position lug upright, then
Figure 13A
tighten screw
12
A7807D 12/22