Upgrade Or Re-Install The System; Introduction - Oce PlotWave 300 User Manual

Introduction

Upgrade or re-install the system

Introduction
When to do
If new system software is available.
If you must re-install the system software.
Before you begin
Create a USB installation key with the UKC Software v3.x (USB Key Creator software).
For a detailed description of the procedure to create this USB installation key, please refer
to the user documentation of the USB Key Creator software.
Required tool
1 USB installation key
1 USB backup key
How to upgrade the system
To upgrade or re-install the system you must do the following.
'Backup the system data' on page 261
1.
'Install the new system software' on page 262
2.
'Restore the system data' on page 263
3.
260 Chapter 6 - Maintain the printing system