Oce PlotWave 300 User Manual page 71

Use the scroll wheel to select copy template 3 ('Reduce copy by 50%').
3.
Note:
With a copy template you can pre-define the settings you need for a copy job. You only
need to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can re-use the job template for each next job without
the need to redefine all the settings every time. (see
copy templates' on page
Press the green button.
4.
After the scan procedure the scanner always holds the original. You can release the original
if you select 'Release paper' on the user panel.
125).
Make a scaled copy (50%) of a CAD drawing
'Define the copy job preferences and
Chapter 3 - Quick start 71