Oce PlotWave 300 User Manual page 177

Settings group: 'Finishing'
#
Setting
'Cut method'
'Output'
Settings group: 'Add strip'
#
Setting
'Leading'
Settings values
'Synchro'
'Standard'
'Back output'
'Top Delivery Tray'
Settings values
0 to 400 mm
Available settings for copy jobs
Function
'Determines the cut size of the print.
'Standard': the print is cut to a standard
media size (DIN, ANSI, ...). 'Synchro':
the print length depends on the image.'
The location to deposit the sheet.
Note:
Not all media types can be deliv-
ered to the Top delivery tray.
Function
'Adds a blank strip at the beginning of
the output. Only valid when 'Cut size' is
'synchro'.'
Chapter 5 - Use the printing system 177