Oce PlotWave 300 User Manual page 77

Use the scroll wheel to select scan template 3 ('Photo to USB').
4.
Note:
With a scan template you can pre-define the settings you need for a scan job. You only
need to set the job settings once and you can store the settings in a job template that is
presented on the user panel. You can re-use the job template for each next job without
the need to redefine all the settings every time. (see
scan templates' on page
Press the green button.
5.
After the scan procedure the scanner always holds the original. You can release the original
if you select 'Release paper' on the user panel.
'Insert USB mass storage device'. This message is displayed on the user panel.
6.
Result
The system creates a sub-directory "scans_x" on the USB mass storage device and stores
the scanned file of the photo in this sub-directory in JPEG format.
130).
Scan a photo to a USB mass storage device
'Define the scan job preferences and
Chapter 3 - Quick start 77