Define The Default Output Quality For Copy Jobs - Oce PlotWave 300 User Manual

Define the default output quality for copy jobs

Define the default output quality for copy jobs
Introduction
The Océ Express WebTools offers 3 settings to optimise the default output quality for
copy jobs. You can define a default output quality for each copy job template.
You can find these settings in the 'Preferences' - 'Copy job defaults' tab.
Note:
Before you can edit a setting or a settings group, you must log on as a Key operator.
'Original type'
The quality of the printed output is optimised based on the type of the original that is
copied.
#
Values
'Line/text standard'
'Line/text draft'
'Colored original'
'Photo'
'Dark original'
'Blueprint'
128 Chapter 4 - Define your workflow with the Océ Express WebTools
Description
'Line/text standard' is default value for copy jobs.
This value is advised for line drawings and design drawings.
Lines and text are optimised, a light background is compensated.
'Line/text draft' is the advised value if you must copy many
originals and the copy speed has higher priority than the copy
quality.
'Colored original' is the advised value for coloured originals like
maps, 3D-CAD drawings, consumer graphics or rasterised
photo's.
The output is optimised for the reproduction of the colour in-
formation. The system compensates for a grey background and
for light wrinkles.
'Photo' is the advised value for photo's.
The output quality is high.
'Dark original' is the advised value for originals with a dark
background.
The output is optimised especially for dark transparent originals.
The system compensates for the dark background and the actual
information on the original is optimised.
'Blueprint' is the advised value for blueprints.
The information on the original is inverted. White lines will be
black, the blue background will be white.