Set Another Language For The Océ Express Webtools - Oce PlotWave 300 User Manual

Set another language for the Océ Express WebTools
Set another language for the Océ Express WebTools
Introduction
The language setting of the internet browser you use defines the language in which the
user interface of the Océ Express WebTools is displayed.
Note:
This language setting does not influence the language on the user panel. On the user
panel you can only toggle between the 'First language' and the 'Second language'. You
can define the values for the 'First language' and the 'Second language' in the regional
settings of the Océ Express WebTools (see
Note:
If the selected language cannot be supported, the standard user interface language for
the Océ Express WebTools will be US English.
Purpose
Change the language setting of the user interface of the Océ Express WebTools.
How to change the language setting in Microsoft
1.
Open Microsoft
Select Tools menu - Internet options. The internet options window appears.
2.
Make sure the General tab is selected.
3.
Click the Languages button in the lower part of the window. Another window opens.
4.
Select the language of your choice. A new language can be added to the list with the Add
5.
button.
Move the newly added language up in the list to the top position.
6.
Click OK to confirm or Cancel to close both windows again.
7.
Click Refresh in the toolbar or open another page. The language of the application will
8.
be changed.
Note:
It is possible that the internet options are put under a different menu, depending on the
Microsoft
92 Chapter 4 - Define your workflow with the Océ Express WebTools
®
Internet Explorer.
®
Internet Explorer version you use.
'Change the regional settings' on page
®
Internet Explorer
108).