Extended Scan Jobs; Introduction To Scan Jobs - Oce PlotWave 300 User Manual

Introduction to scan jobs

Extended scan jobs

Introduction to scan jobs
A basic scan job only takes three steps. Feed the original face up, select 'Scan' on the user
panel and press the green button. Every other type of scan job is called an extended scan
job.
An extended scan job takes some additional steps, where you select a specific scan template
and, if necessary, change the predefined scan job settings on the user panel. The scan
templates are defined in the Océ Express WebTools (see
and scan templates' on page
templates. The scan templates provide access to the different settings per scan template.
You can use the scroll wheel to see all the predefined settings. When the scan job is fin-
ished, the scanned file is placed in the Smart Inbox 'Scans'.
204 Chapter 5 - Use the printing system
130). When you select 'Scan', the user panel shows four scan
'Define the scan job preferences