Oce PlotWave 300 User Manual page 206

Do an extended scan job
Select your scan template.
4.
If you want to change the pre-defined settings of the selected scan template, use the
confirmation button to open the scan template and display an overview of the pre-defined
settings groups.
Scroll to the settings group you want to change.
5.
Open the settings group you want to change with the confirmation button and scroll
6.
to the setting you want to change.
Open this setting, scroll through the settings values and select the correct value with
the confirmation button .
Change the other settings in the settings group if necessary.
206 Chapter 5 - Use the printing system