Oce PlotWave 300 User Manual page 211

Setting
'Left'
'Right'
Settings group: 'Original width'
#
Setting
'By scanner'
'Standard'
Settings values
0 to 914 mm
0 to 914 mm
Settings values
'By scanner'
'A0'
'A1'
'A2'
'A3'
'E+ (36")'
'B1 (707 mm)'
'B2 (500 mm)'
Available settings for scan jobs
Function
'Remove a strip from the left side of the
original.'
'Remove a strip from the right side of the
original.'
Function
The width of the original is automatically
detected by the scanner.
The width of the original is a standard
size.
Note:
Depend on the media series you
defined in the Océ Express
WebTools
Chapter 5 - Use the printing system 211