Injection Pump - Removal And Installation - MTU 12 V 2000 P12 Operating Instructions Manual

7.5.2 Injection pump – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Crowfoot wrench, 19 mm
Crowfoot wrench, 22 mm
Torque wrench, 20–100 Nm
Ratchet adapter
Transition piece
Torque wrench, 0.5–5 Nm
Grease (Kluthe Hakuform 30–10/Emulgier)
Sealing ring
Sealing ring
DANGER
Unguarded rotating and moving engine components.
Risk of serious injury – Danger to life!
• Before barring the engine, ensure that nobody is in the danger zone.
WARNING
Fuels are combustible.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
Preparatory steps
1. Shut off fuel supply line before fuel filter.
2. Remove engine control system (→ Page 149).
3. Drain fuel (→ Page 108).
4. Remove charge-air pipes and all seals.
Part No.
F30027424
F30027425
F30026582
F30027340
F30006234
0015384230
X00029933
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
MS150025/02E 2012-10 | Task Description | 99
Qty.
1
1
1
1
1
1