MTU 12 V 2000 P12 Operating Instructions Manual page 70

Fault code
216
219
220
222
223
229
230
231
232
240
245
246
250
266
70 | Troubleshooting | MS150025/02E 2012-10
Fault message Meaning
SD T-LUBE OIL Sensor B07 faulty (lube oil
temperature).
SD T-INTAKE AIR Sensor B03 faulty (intake
air temperature).
SD COOLANT LEV‐ Sensor F33 faulty (engine
EL coolant level 1).
SD LEVEL LEAK‐ Sensor fault (leak fuel).
AGE FUEL
SD LEVEL INTER‐ Sensor fault (charge air
COOLER coolant level).
SD ENG. SPEED Sensor fault crankshaft
SENSORS speed and camshaft
speed.
SD CRANKSHAFT Sensor B13 faulty (crank‐
SPEED shaft speed).
SD CAMSHAFT Sensor B1 faulty (camshaft
SPEED speed).
SD CHARGER Sensor B44 faulty (ETC
SPEED 1 speed 1).
SD P-FUEL Sensor B34 faulty (fuel
pressure).
SD POWER SUP‐ Sensor fault (ECU operat‐
PLY ing voltage).
SD T-ELECTRONIC Temperature sensor for
measuring electronics tem‐
perature faulty.
SD CAN SPEED DE‐ Sensor fault (CAN setpoint
MAND speed).
SD SPEED DE‐ External speed setting faul‐
MAND AN. ty.
Action
1. Check cabling (→ Engine oper‐
ating instructions);
2. Contact Service
• Check sensor.
1. Check cabling (→ Engine oper‐
ating instructions);
2. Contact Service
• Check sensor.
1. Switch system off and back on;
2. check fault message;
3. check cabling (→ Engine oper‐
ating instructions);
4. Contact Service
• Check sensor.
1. Check cabling (→ Engine oper‐
ating instructions);
2. Contact Service
• Check sensor.
1. Check cabling (→ Engine oper‐
ating instructions);
2. Contact Service
• Check sensor.
1. Check cabling (→ Engine oper‐
ating instructions);
2. Contact Service
• Check sensor.
1. Check cabling (→ Engine oper‐
ating instructions);
2. Contact Service
• Check sensor.
1. Check cabling (→ Engine oper‐
ating instructions);
2. Contact Service
• Check sensor.
1. Check cabling (→ Engine oper‐
ating instructions);
2. Contact Service
• Check sensor.
1. Check cabling (→ Engine oper‐
ating instructions);
2. Contact Service
• Check sensor.
Replace engine governor (→ En‐
gine operating instructions).
Replace engine governor (→ En‐
gine operating instructions).
Contact Service.
• Check CAN communication.
(→ Engine operating instructions)
1. Check cabling
2. Check speed setting.