Engine Mounting / Support; Engine Mounts – Resilient Elements Check - MTU 12 V 2000 P12 Operating Instructions Manual

7.18 Engine Mounting / Support

7.18.1 Engine mounts – Resilient elements check
Preconditions
☑ Engine is stopped and starting disabled.
☑ Engine is filled with coolant and engine oil.
Engine mounts – Resilient
elements check
1. Wipe rubber surface with dry cloth, do not
use organic detergents.
2. Check resilient elements for crack formation
and deformation by visual inspection.
3. Have cracked elements replaced, contact
Service.
Setting dimension check
1. Measure setting dimension:
• Dimension (a) = 55 mm.
2. If dimension (a) is less than 55 mm, resilient elements must be replaced. Contact Service.
MS150025/02E 2012-10 | Task Description | 143