Injection Pump - Removal And Installation - MTU 12 V 2000 M40A Operating Instructions Manual

7.6.2 Injection pump – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 20-100 Nm
Ratchet adapter
Crow-foot box wrench
Crow-foot box wrench
Torque wrench, 0.5-5 Nm
Grease (Kluthe Hakuform 30-10/Emulgier)
Sealing ring
Sealing ring
DANGER
Unguarded rotating and moving engine components.
Risk of serious injury – Danger to life!
• Before barring the engine, ensure that nobody is in the danger zone.
WARNING
Fuels are combustible.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
Preparatory steps
1. Shut off fuel supply line before fuel filter.
2. Remove engine control system (→ Page 227).
3. Drain fuel (→ Page 179).
4. Remove charge-air pipes and all seals.
Part No.
F30026582
F30027340
F30027424
F30027425
0015384230
X00029933
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
MS150031/05E 2013-01 | Task Description | 169
Qty.
1
1
1
1
1