Putting The Engine Into Operation After Scheduled Out-Of-Service-Period - MTU 12 V 2000 P12 Operating Instructions Manual

4.3 Putting the engine into operation after scheduled out-of-
service-period
Preconditions
☑ Engine is stopped and starting disabled.
Putting the engine into operation
Item
Lube oil system
Cooling system
Cooling system
Fuel prefilter
Monitoring equipment
Engine/generator control
system
Task
Check oil level (→ Page 123);
Check engine coolant level (→ Page 131);
Check charge-air coolant level (→ Page 141).
Preheat coolant with preheating unit.
Drain (→ Page 114).
Carry out lamp test (see manufacturer's documentation).
Switch ON;
Select operating mode, e.g. MANUAL OPERATION, AUTOMATIC OPER‐
ATION.
MS150025/02E 2012-10 | Operation | 51