Table of Contents
Advertisement
Customer interface
• 24 binary outputs
• 3 PWM outputs
• 8 display outputs
• 28 channel binary input
• 10 analog inputs (e.g. PT100, 4–20 mA, 0-10 V, etc.)
• 4 frequency inputs
• 1 dialog interface
• Extendable with MCS 5 PIM I/O cards
Data connections
1 Engine governor
2 SAM
Data transmission
The devices are equipped with a CAN bus for transmitting data between the individual subsystems. This
CAN bus is in redundant design.
The CAN bus is a standardized automation technology field bus which allows various systems and devi‐
ces to communicate with each other providing they are equipped with a CAN bus interface.
Tasks of the CAN bus:
CAN bus
Tasks:
• Receiving plant signals (desired speed) and commands from higher-level control systems.
• Outputting all measured values/limit values for the Monitoring and Control System.
• Outputting alarms for signaling and evaluation in the Monitoring and Control System.
• Outputting relevant signals for engine control.
3 PIM 601 (option) serial
interface / slave
4 PIM 602 (option) serial
interface / master
MS150025/02E 2012-10 | General Information | 23
Hide quick links:
Advertisement
Table of Contents
