Table of Contents
Advertisement
3.4 SAM
Use/application
• Installation in enclosed control cabinets.
• Suitable for mounting on mounting rails (rail installation) or for installation with screws on the rear wall
of the cabinet (fixed installation).
• Suitable for connection wires or leads up to AWG16 (US) (1.5 mm
Technical data
Term
Installation position
Operating voltage
Power consumption
Degree of protection:
Shock:
Rail mounting
Fixed mounting
Vibrations:
Rail mounting
Fixed mounting
Unit
Value
As desired, ensuring that the installed fault display is
legible.
VDC
24 rated value (-30%; +30%, temporary -50%)
W
Below 7 (0.25A at 24V) without additional loads.
IP 40 according to DIN 40 050
10 g, 11 ms
30 g, 11 ms
Hz
2 - 12.8:Xpp < ± 3mm
12.8 - 1000:a < 1g [rms]
Hz
2 - 12.8: Xpp < ± 3 mm
12.8 - 100:a < 4g [rms]
MS150025/02E 2012-10 | Technical Data | 43
2
).
Hide quick links:
Advertisement
Table of Contents
