MTU 12 V 2000 P12 Operating Instructions Manual page 104

Removing fuel injector
1. Remove leak-off-fuel lines.
2. Remove fuel line (3).
3. Remove thrust screw (2).
4. Pull off pressure pipe neck (1).
5. Extract fuel from the exposed bores using
the suction device.
6. Remove screw (2).
7. Take off clamp (1).
8. Screw extractor into injector.
9. Remove injector using the extractor.
10. Remove sealing ring using a self-made
hook.
11. Seal all openings with appropriate covers
after removal.
104 | Task Description | MS150025/02E 2012-10