Injection Pump - Removal And Installation - MTU Detroit Diesel 12 V 2000 P62 Technical Publication

102
6.5.2 Injection pump – Removal and installation
Preconditions
• Engine is stopped and starting disabled.
Special tools
Designation / Use
Barring tool
Spider patch spanner
Spider patch spanner
Material
Designation / Use
Petroleum jelly
Spare parts
Designation / Use
Sealing ring
Sealing ring
Unguarded rotating and moving engine components.
Risk of serious injury — danger to life!
DANGER
Fuels are combustible.
Risk of fire and explosion!
WARNING
Preparatory steps
1. Shut off fuel supply line before fuel filter.
2. Remove engine control system (→ Page 154).
3. Drain fuel (→ Page 111).
4. Remove charge-air pipes and all seals.
MS15009/00E 06-09
• Before barring the engine, ensure that nobody is in the danger zone.
• Avoid naked flames, electrical sparks and ignition sources.
• Do not smoke.
Task Description
Part No.
F6557929
F30027424
F30027425
Part No.
Part No.
Qty.
1
1
1
Qty.
Qty.
© MTU