Crankcase Breather - Oil Separator Element Replacement, Diaphragm Check And Replacement - MTU 12 V 2000 P12 Operating Instructions Manual

7.3.2 Crankcase breather – Oil separator element replacement, diaphragm check
and replacement
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Torque wrench, 6-50 Nm
Ratchet adapter
Engine oil
Filter element
Diaphragm
Gasket
WARNING
Hot oil.
Oil can contain combustion residues which are harmful to health.
Risk of injury and poisoning!
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Replacing oil separator element
1. Remove cover (2) with O-ring (3).
2. Remove filter element (1) from housing (4).
3. Insert new filter element in housing (4).
4. Install cover (2) with new O-ring.
5. Use torque wrench to tighten the screws of cover (2) to the specified torque.
Name
Screw
6. Replace further oil separator elements in the same way.
Size Type
Tightening torque
Part No.
F30027336
F30027340
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
Lubricant
(Engine oil)
MS150025/02E 2012-10 | Task Description | 93
Qty.
1
1
Value/Standard
10 Nm −2 Nm