Governor / Control System; Engine Governor And Connectors – Cleaning - MTU 12 V 2000 P12 Operating Instructions Manual

7.20 Accessories for (Electronic) Engine Governor / Control
System
7.20.1 Engine governor and connectors – Cleaning
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Connector pliers
Isopropyl alcohol
Engine governor and connectors -
Cleaning
1. Remove coarse dirt from housing surface
with isopropyl alcohol.
2. Remove dirt from surface of connectors (1),
connector sockets and shrink sleeves (2)
using a cloth moistened with isopropyl alco‐
hol.
3. Check legibility of cable labels. Clean or re‐
place illegible labels.
Cleaning severely contaminated
connectors on engine governor
1. Use connector pliers (2) to disengage bayo‐
net union nut (4) and withdraw connec‐
tor (3).
2. Clean connector housings, connector sock‐
et housings (1) and all contacts with iso‐
propyl alcohol.
3. When connectors, sockets and all contacts
are dry: Fit connectors and check governor
connections (→ Page 147).
Part No.
0135315483
X00058037
MS150025/02E 2012-10 | Task Description | 145
Qty.
1
1