Injector - Removal And Installation - MTU 12 V 2000 P12 Operating Instructions Manual

7.6.2 Injector – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Extractor
Fuel suction device
Torque wrench, 20-100 Nm
Socket wrench
Crowfoot wrench, 19 mm
Crowfoot wrench, 22 mm
Double box wrench
Ratchet adapter
Transition piece
Grease (Kluthe Hakuform 30-10/Emulgier)
Sealing ring
Sealing ring
WARNING
Fuels are combustible.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
WARNING
Compressed air
Risk of injury!
• Do not direct compressed-air jet at persons.
• Wear protective goggles / safety mask and ear protectors.
Preparatory steps
1. Remove cylinder head cover (→ Page 97).
2. Drain fuel (→ Page 108).
Part No.
F30377999
F30378207
F30026582
F30025897
F30027424
F30027425
F30011450
F30027340
F30006234
X00029933
(→ Spare Parts Catalog)
(→ Spare Parts Catalog)
MS150025/02E 2012-10 | Task Description | 103
Qty.
1
1
1
1
1
1
1
1
1