102
6.3
Crankcase Breather
6.3.1
Crankcase breather – Oil separator replacement, diaphragm
check and replacement
Preconditions
• Engine is stopped and starting disabled.
Special tools
Designation / Use
Torque wrench 6-50 Nm
Spare parts
Designation / Use
Filter element
Diaphragm
Seal
Hot oil.
Oil can contain combustion residues which are harmful to health.
WARNING
Risk of injury and poisoning!
Replacing oil separator
1. Remove cover (2) with O-ring (3).
2. Remove filter element (1) from housing (4).
3. Insert new filter element in housing (4).
4. Fit cover (2) with new O-ring.
5. Use torque wrench to tighten the screws of
cover (2) to specified torque 10 Nm -2 Nm.
6. Replace further oil separator elements in the
same way.
M015710/01E 07-02
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Task Description
Part No.
F30027336
Part No.
Qty.
1
Qty.
© MTU