Crankcase Breather - Oil Separator Replacement, Diaphragm Check And Replacement - MTU Detroit Diesel 12 V 2000 P62 Technical Publication

96
6.3.2 Crankcase breather – Oil separator replacement, diaphragm
check and replacement
Preconditions
• Engine is stopped and starting disabled.
Special tools
Designation / Use
Torque wrench 6-50 Nm
Ratchet adapter
Spare parts
Designation / Use
Filter element
Diaphragm
O-ring
Hot oil.
Oil can contain combustion residues which are harmful to health.
WARNING
Risk of injury and poisoning!
Replacing filter element of oil separator
1. Remove cover (2) with O-ring (3).
2. Remove filter element (1) from housing (4).
3. Insert new filter element into housing (4) ensuring
correct installation position, and fit cover (2)
with new O-ring.
4. Tighten screws of cover (2) to specified tightening
torque of 6 Nm + 2 Nm.
5. Replace filter elements of further oil separators in
the same way.
MS15009/00E 06-09
• Wear protective clothing, gloves, and goggles / safety mask.
• Avoid contact with skin.
• Do not inhale oil vapor.
Task Description
Part No.
F30027336
F30027340
Part No.
Qty.
1
1
Qty.
© MTU