Assembly And Setup; Unpacking - Star Trac eSPINNER Installation And Operation Manual

Assembly and Setup

Use the following procedures to unpack and assemble your eSPINNER
separate cartons.
Carton 1 – large box container the bike frame and associated assembly parts.
Carton 2 – smaller box container the display console, manual, warranty and power cord.

UNPACKING

Prepare the area that you will be unpacking and assembling the bike to be free from debris that may cause
damage. Observe all safety precautions and take care while unpacking and assembling the bike. First cut
and remove the shipping straps from the carton. Gently lay the box on its side and carefully cut the tape on
the bottom of the carton and fold the flaps outward. Position the shipping carton back upright ("Heavy End"
towards the bottom). Open the top of the carton and fold back all four flaps. Carefully lift the carton to ex-
pose the bike. Remove all parts from the shipping carton and foam inserts, and verify that the following
parts are included in your shipment:
eSpinner Parts List – Carton 1 Frame
Description
Main Frame Assembly
Handlebar Post
Handlebar w/ Grip
Seat Post
Seat Slider Assembly w/ Saddle
Pedals (set of two)
Hardware
M8x1.25, 16mm Flat Head Screw
M8x1.25, 16mm Socket Set Screw
Wrench 21 mm
M10x1.5, 45 Button Head Screw
M6x1x10 mm Console Post Screw
M4x1x10 mm Console Sleeve Screw
Transport Wheels
Wrench Hex, 5mm
Wrench Hex, 4mm
eSpinner Parts List – Carton 2 Console
Description
Main Console
Manual
Warranty Card
Spare Parts Kit- Save the box of spare parts in a safe place so you have service parts when needed in the
future.
Qty. Description
1 Leg Assembly
1 Water Bottle Holder
1 Console Post Plastic Sleeve
1 Console Post
1 Spare Parts Kit (includes brake pad and
pedal straps)
1
2 Multi-Wrench
1 Rear Pop Pin
1 Wrench Hex 3mm
2 Spacer 30 mm
1 M10x1.5, 60 mm Button Head Screw
2 M10x1.5, 65 mm Button Head Screw
2 M10x1.5 Nyloc Hex Nut
1 20 mm Washer, Flat
1 M8 x 1.25, 20 mm Flat Head Screw
Qty. Description
1 5/16x18x .75" Phillips Pan Head Screw
1 Power Cord
1
. Your eSpinner is shipped in two
®
Qty.
2
1
1
1
1
1
1
1
2
4
4
4
16
2
Qty.
4
1
9