Spinner ® Nxt/Elite/Pro/V Assembly And Setup; Spinner ® V Assembly And Setup - Star Trac Spinner v Owner's Manual

A
SSEMBLY AND
A
SSEMBLY AND
SPINNER V ASSEMBLY AND SETUP
®
Use the following procedures to unpack and assemble your
U
NPACKING
Position the shipping carton so the "Heavy End" logo is located at the bottom. Open the top of the carton and fold back all four
flaps. Carefully tilt the box forward so that the box may be lifted to expose the bike. Remove all parts from the shipping carton
and foam inserts, and verify that the following parts are included in your shipment:
V-bike Parts List
Description
Main Frame Assembly (not shown)
Handlebar
Seat
Handlebar Post
Seat Post
Back Leg
Front Leg
Leveling Adjusters (pre-installed)
Pedals (set of two)
Spare Parts Kit- Save the box of spare parts in a safe place so you have service parts when needed in the future.
Take time now to enter your Spinner
member). If parts are missing, or if you have any operational questions, please call Star Trac's Service department at (800) 503-
1221; have your serial number ready.
Serial No._____________________________________________
NOTE: If you are missing any of the parts listed above, inspect the packing material and the box for items that may have been overlooked.
If parts are missing, or if you have any product questions, please call Star Trac's Service Department at (800) 503-1221, please have your Spinner's
serial number ready.
CAUTION: Damage to the bike during assembly is not covered as part of the limited Star Trac® warranty. Take care not to drop or lean the bike on
the handle bar pop-pin. Carefully stand the bike up in the normal upright position on a stable surface so it will not tip over during assembly.
Page 5
S
ETUP
S
ETUP
SPINNER
Qty.
1
1
1
1
1
1
1
4
1
V serial number in the space below (serial number is located on the bottom cross
®
V.
®
Description
Tension Handles w/Washers
Tension Handles w/o Washers
Water Bottle Brackets
8mm x 70mm (long) w/Washer and Nuts
8mm x 60mm (short) w/o Washer and Nuts
Allen Wrenches, Metric
Multi-Purpose Wrench
Spare Parts Kit
(includes brake pad and pedal straps)
Qty.
2
2
2
2
2
2
1
1
SPINNER OWNER'S GUIDE
®
_