Star Trac eSpinner Troubleshooting

Green screen

Hide thumbs Also See for eSpinner:

If an eSpinner display shows a green screen in the "Spinning Video" mode (not in the "TV" mode), check if the audio

settings are set correctly and recycle the power (turn it off, wait 10 seconds, and turn it back on).

On the start screen, press the start button.

2. A 3-touch sequence is needed to access the password entry dialog box.

Touch the locations on the workout options screen in the sequence shown

(

, then

, and then center of the

The password dialog box should now appear at the screen.

Note: Each location must be pressed within 1 second of the previous

location. If you are unable to access the password screen after several

attempts, you may need to re-calibrate the touch screen.

STAR TRAC FITNESS

Troubleshooting

Green Screen

eSpinner

logo)

637-1328 Rev: A

Table of Contents

Do you have a question about the eSpinner and is the answer not in the manual?

Page 1 If an eSpinner display shows a green screen in the “Spinning Video” mode (not in the “TV” mode), check if the audio settings are set correctly and recycle the power (turn it off, wait 10 seconds, and turn it back on).
Page 2 ‘enable languages’ and ‘disable language’ button to allow user to select text language on the screen. When the ‘enable languages’ option is selected, an ‘audio menu’ option will populate in the list. STAR TRAC FITNESS 637-1328 Rev: A...
Page 3 6. Once the ‘enable languages’ option is selected, press the ‘audio menu’ button to gain entry to audio menu screen. 7. If you have the standard eSpinner console and have not upgraded to a mulit language video card than all the audio language settings should be set to secondary.