Star Trac eSPINNER Installation And Operation Manual page 43

Service Menu
Calibration and Setup
While in Calibration and Setup, the following information can be access and/or modified:
•
Recalibrate - to recalibrate the touch screen, press the recalibrate
button and follow the onscreen instructions.
You also recalibrate the touch screen by:
1) Have the unit showing the initial start screen that has
the start button at the bottom.
2) Hold the fan button down for four seconds
3) Release the fan button for four seconds
4) Hold the fan button for four seconds. The screen
should pop into the calibration while you are still hold-
ing the key down. If it does not, then release the but-
ton for 10 seconds and try again.
Caution: Once you are in the touch screen calibration you
cannot exit it by hitting the "Main Menu" button until all
three calibration points are touched first.
•
TV setup - pressing this button will let you setup the TV. See Installa-
tions and Setup section for detail instructions.
43