Star Trac eSPINNER Installation And Operation Manual page 20

Assembly and Setup
♦
A progress bar will indicate the scanning progress.
NOTE:
you may stop the scan process at any time by press-
stop scan
ing the
scanned up to that point will be displayed.
♦
tv menu
You may press the
screen.
♦
Once in the channel scan is completed, press the
button twice to exit TV Setup mode into the workout options
screen.
Congratulations, you have now completed the assembly and setup of your eSPINNER® . Enjoy the ride.
!Attention!
Crank bolt must be re-torqued after the first 10 hours of use. Refer to Preventive Maintenance section.
20
button. If you do so, only the channels
button to return to the TV scan
debug menu