For pleasant driving
4. Turn the TUNE switch (B) left and right and select either
ON or OFF.
CT ON-
Automatic mode
CT OFF- Manual mode
5
NOTE
● After selecting a mode, you can leave the function setup
mode by taking either of the following steps:
• Press the TUNE switch (B) for at least 2 seconds.
• Make no entry for 10 seconds.
5-76
Automatic mode
The automatic mode can set the local time automatically by
using the signal from the local RDS stations. In this mode, CT
(A) is shown in the display. Refer to "Radio data system
(RDS)" on page 5-23, 5-46.