Mitsubishi Outlander 2007 Owner's Manual page 337

For pleasant driving
To listen to a CD
The CD can be loaded or ejected by pressing the LOAD button
(5) or the eject button (15) even if the audio system power is
off.
1. Press the PWR switch (3) to turn the audio system ON and
OFF. The audio system turns on in the last mode used.
2. Press the CD button (2) to enter CD mode.
The autochanger will start playback if the CD is already in
the autochanger.
3. To stop the CD, turn off the power by pressing the PWR
switch (3) or change over to radio mode by pressing the
AM/FM button (1), or eject the disc by pressing the eject
button (15).
NOTE
● For information on adjusting the volume and tone, refer to
"To adjust the volume" on page 5-17 and "To adjust the
tone" on page 5-17.
5 ● As many as 6 CDs can be inserted into the CD auto-
changer.
● 8 cm CDs cannot be played on this autochanger.
● For information concerning the handling of compact
discs, refer to "Handling of compact discs" on page 5-70.
5-56
To set discs
E00709600805
To set a single disc
1. Press the LOAD button (5) briefly.
2. The autochanger will show "WAIT" on the display and
start making itself ready for disc loading.
3. When the autochanger is ready for disc loading, the
LOAD indicator (4) will illuminate and the display will
show "LOAD DISC No. (1-6)".
4. When a disc is inserted into the CD slot, the disc will
begin to play.