Mitsubishi Outlander 2007 Owner's Manual page 330

NOTE
● If the SEEK button (7 to 8) is pressed, the radio will try to
find out another broadcast of the same programme type as
currently selected.
● If no station is found with your desired PTY, the display
will show "EMPTY" for about 5 seconds and the radio
will return to the previous station.
How to enter PTYs in the memory
As many as 6 PTYs can be entered in the memory.
Follow the steps described below.
1. Press either the TUNE switch (6) to tune the PTY to be
entered in the memory.
2. Press one of the memory select buttons (3) for 2 seconds
or longer. The sound will be momentarily interrupted
while the PTY is being entered into the memory. The
number of the button corresponding to the entry into the
memory and the PTY are displayed.
3. The preset memory setting is retrieved by pressing the
button and then releasing it within about 2 seconds.
To change the language of PTY display
You can select your favourite language among English, French,
German, Swedish, Spanish and Italian.
1. Press the TUNE switch (6) for 2 seconds or longer to
select the language of PTY display mode.
Refer to "Function setup mode" on page 5-52.
2. Turn the TUNE switch (6) to select a language.
NOTE
E00721400076
● After selecting a mode, you can leave the function setup
mode by taking either of the following steps:
• Press the TUNE switch (6) for at least 2 seconds.
• Make no entry for 10 seconds.
For pleasant driving
E00721500136
5
5-49