Mitsubishi Outlander 2007 Owner's Manual page 363

For pleasant driving
Speaker enrollment function
The Hands-free Bluetooth
with voice recognition can use the speaker enrollment function
to create a voice model for one person per language.
Your voice characteristics and pronunciations are registered in
this voice model. This makes it easier for the Hands-free Blue-
®
tooth cellular phone interface system with voice recognition
to recognise voice commands said by you.
You can turn a voice model registered with the speaker enroll-
ment function on and off whenever you want.
5
5-82
E00727400010
®
cellular phone interface system
Speaker enrollment
It takes about 10 to 15 minutes to complete the speaker enrol-
ment process.
To ensure the best results, run through the process while in the
driver's seat, in an environment that is as quiet as possible
(when there is no rain or strong winds and the vehicle windows
are closed).
Use the following procedure for speaker enrollment.
1. Stop your vehicle in a safe area, put the selector lever in
the "P" position and pull the parking brake lever.
NOTE
● Speaker enrollment is not possible unless the vehicle is
parked. Make sure you park the vehicle in a safe area
before attempting speaker enrollment.
● Please turn off your phone while in speaker enrollment to
prevent interruption of the process.
2. Press the SPEECH button.
3. Say "Voice training".
4. The voice guide will say "This operation must be per-
formed in a quiet environment while the vehicle is
stopped. See the owner's manual for the list of required
training phrases. Press and release the SPEECH button
when you are ready to start. Press and hold the HANG-UP
button to cancel at any time". Press the SPEECH button to
start the speaker enrollment process.