Head Restraints - Mitsubishi Outlander 2007 Owner's Manual

Seat and seat belts
6. Fold the seatback while pulling the belt (F) located in the
centre of the seatback.
2
NOTE
● When stowing the third seat, make sure there is no lug-
gage in the stowing area. If the seat is stowed while there
is luggage in the stowing area, it could damage the seat.
7. Return the cover to its position.
2-22

Head restraints

WARNING
!
● Driving without the head restraints in place can
cause you and your passengers serious injury or
death in an accident. To reduce the risk of injury in
an accident, always make sure the head restraints
are installed and properly positioned when the seat
is occupied.
● Never place a cushion or similar device on the seat-
back. This can adversely affect head restraint per-
formance by increasing the distance between your
head and the restraint.
To adjust height
Adjust the head restraint height so that the centre of the Head
restraint is as close as possible to eye level to reduce the
chances of injury in the event of collision. Any person too tall
for the Head restraint to reach their seated eye level, should
adjust the restraint as high as possible.
To raise the head restraint, move it upward. To lower the
restraint, move it downward while pushing the height adjusting
knob (A) in the direction of the arrow. After adjustment, push
the head restraint downward and make sure that it is locked.
E00403300793