Mitsubishi Outlander 2007 Owner's Manual page 163

Instruments and controls
Drive mode indicator display screen
This displays the 4WD status.
If you select "4WD LOCK" mode with the drive
mode selector, "4WD LOCK" is displayed; if
you select "4WD AUTO" mode, "4WD" is dis-
played.
Nothing is displayed when 2WD mode is
selected. Refer to "Drive mode selector" on page
4-21.
"!" mark display screen (when the
ignition switch is "ON")
3
This is displayed when you press the multi-infor-
mation meter switch and switch the warning dis-
play screen.
This mark is also displayed if there is another
warning other than the one displayed.
When the cause of the warning display is elimi-
nated, the "!" mark goes out automatically.
NOTE
● When the "!" mark is displayed, the warn-
ing display screen can be redisplayed on the
information screen.
Refer to "Information screen (when the
ignition switch is "OFF")" on page 3-6.
Refer to "Information screen (when the
ignition switch is "ON")" on page 3-13.
3-12
Active Stability Control (ASC) OFF
display screen*
E00520800013
This is displayed when the active stability con-
trol (ASC) is turned off with the ASC OFF
switch.
If there is a fault with the ASC, the ASC OFF
display is shown.
Refer to "ASC OFF switch" on page 4-37.
E00520900014
E00521000012