Download Table of Contents Print this page

Lamp Monitor Buzzer; Dipper (High/Low Beam Change - Mitsubishi Outlander 2007 Owner's Manual

Advertisement

Table of Contents

Lamp monitor buzzer

[When the engine was started using the key]
If the driver's door is opened when the key is in the "LOCK" or
"ACC" position or removed from the ignition switch while the
lamps are on, a buzzer will sound to remind the driver to turn
off the lamps.
[When the engine was started using the keyless operation func-
tion]
If, while the lamps are illuminated, the ignition switch is set to
the "LOCK" or "ACC" position, or the driver's door is opened
with the ignition switch set to the "LOCK" position, a buzzer
will sound to remind the driver to turn off the lamps.
In both cases, the buzzer will automatically stop if the auto-cut-
off function is activated.

Dipper (High/Low beam change)

E00506100243
When the lamp switch is in the "
changes from high to low (or low to high) each time the lever is
pulled fully (1). While the high beam is on, the high beam indi-
cator lamp in the instrument cluster will also illuminate.
Instruments and controls
E00506200329
" position, the beam
3
3-59

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents