Mitsubishi Outlander 2007 Owner's Manual page 130

3. Remove the head restraint from the location in which you
wish to install a child restraint.
4. Latch the tether strap hook (F) of the child seat to the
tether anchor bar (G) and tighten the top tether strap hook
so it is securely fastened.
5. Push and pull the child restraint in all directions to be sure
it is secure.
To remove
Remove the child restraint system in accordance with the
instructions provided by the child restraint system manufac-
turer.
Installing a child restraint system to a 3-point
type seat belt (with emergency locking
mechanism)
Installation:
1. Fasten the seat belt to secure the child restraint system.
Make sure you hear a "click" when you insert the latch
plate in the buckle.
2. Use the locking clip to completely eliminate any slack-
ness.
Seat and seat belts
E00408700196
2
2-51