Mitsubishi Outlander 2007 Owner's Manual page 273

Starting and driving
NOTE
● The buzzer may sound lower than the normal warning
sound when the reversing sensor system is receiving ultra-
sonic noise from other sources, but this is not a malfunc-
tion. The buzzer will stop sounding and the system will
return to normal operation after the noise is no longer
received.
To operate
To operate the system, move the gearshift lever to the "R"
(Reverse) position while the ignition switch is in the "ON"
position. To stop the operation, push the "SONAR" switch.
4
NOTE
● Only when the gearshift lever is in the "R" (Reverse) posi-
tion, the reversing sensor system can be operated or be
stopped by using the "SONAR" switch.
4-50
The reversing sensor system operation indicator lamp (A) will
turn off that the system has stopped operating.
It will flash in case there is a malfunction in the system. For
details, refer to "Reversing sensor system operation indicator
lamp" on page 4-52.
E00615700129
To return the system to the operating state, push the "SONAR"
switch again. When the system returns to the operating state,
the buzzer sounds once and the indicator lamp illuminates.
NOTE
● The reversing sensor system operation indicator lamp
flashes once when the ignition switch is turned to the
"ON" position.