Mitsubishi Outlander 2007 Owner's Manual page 326

Automatic setting
With the method, all manually set stations in the band currently
selected for reception are replaced with stations in the same
band that are automatically selected in order of signal strength.
The radio automatically selects 6 stations in the FM band (FM3
station only) and 6 stations each in the MW and LW band.
Follow the steps described below.
1. With the radio mode selected, hold down the AM/FM but-
ton (2) for 2 seconds or longer. The 6 stations with the
best signal strength will automatically be assigned to the
memory select buttons (3), with the lowest-frequency sta-
tion being assigned to the lowest-number button.
2. When you subsequently press a memory select button to
select a channel number, the radio will begin receiving the
station assigned to that number.
NOTE
● If you press the AM/FM button (2) for 2 seconds or longer
while tuning in the FM1 or FM2 band, the radio will auto-
matically switch to the FM3 band, where the automatic-
seeking/stroring will be activated.
For pleasant driving
5
5-45