Drive Mode - Mitsubishi XPANDER HEV 2023 Manual

4. While depressing the brake pedal, con-
tinue to press the electrical parking switch
(A) and move and hold the selector lever
(B) toward the front or rear of the vehicle
for 3 seconds or longer.
A buzzer will sound and the following
display is appeared on the information
screen in the instrument cluster to indicate
that the procedure is complete.
5. Press the power switch to stop the Hybrid
EV System.
NOTE
 If the operation mode of the power switch is
put in ON after performing the above proce-
dure, for example to close the door windows,
it is necessary to perform the above proce-
dure again from step 4.
 The Electric parking brake is not released
automatically even if the above procedure is
performed. Release the Electric parking
brake if necessary.

Drive mode

Select the drive mode from the following
seven types to suit the driving conditions.
Drive mode Function
This mode is used when you
want to charge the drive bat-
CHARGE tery and drive as an EV at
your destination. (Battery
charge mode)
Drive mode
This mode is used when you
want to drive the vehicle as
an EV to avoid starting the
engine as much as possible in
EV places such as residential
areas where noise and
exhaust emissions must be
considered. (EV priority
mode)
This mode is suitable for
driving in a variety of road
NORMAL
environments that are nor-
E00654500050
mally used.
This mode is suitable for
driving on roads that are wet
WET
or lightly flooded with water
due to heavy rain.
This mode supports driving
GRAVEL under bad conditions such as
on unpaved roads.
This mode is suitable for
driving on dry, paved roads,
TARMAC
and features enhanced power
performance and stability.
Starting and driving
Drive mode
Function
6
6-23