Running Mail - Neopost IS-5000 User Manual

OMEGA1_US.book Page 43 Vendredi, 1. octobre 2010 10:46 10

Running Mail

3.3

Running Mail

Recommended Steps for Processing Mail
To run mail, complete the preparation steps in section
Setup
Running mail varies significantly depending on the Weighing mode you choose.
The current weighing mode is indicated by the icon on the Weighing modes button.
About weighing modes, see
•
Running Mail by Weighing Mode
Dynamic weighing uses the inline Dynamic Weighing Module (p.44)
•
Standard weighing uses the external Weighing Platform (p.45)
•
Differential weighing uses the external weighing platform, but allows the user to
•
place a stack or container of mail on the platform (p.47).
Manual weight entry allows the user to enter in a manual weight(p.49).
•
Using Labels
You may print postage on precut, self-adhesive labels or thermal, pressure sensitive
roll tape.
Two label dispensers are available:
Internal label dispenser (ILD) for precut labels. This is a standard feature on the
•
mailing system. See
Remote label dispenser (optional RLD), that uses a thermal roll tape. This is an
•
optional accessory. See
p.30, before following the steps below.
Selecting a Weighing Mode
Filling the Internal Label Dispenser
Printing Using the Remote Label Dispenser
Standard
p.67.
p.86.
p.87.
3
43