How To Re-Date Mail (Running Mail) - Neopost in-600 Series User Manual

Running Mail

How to Re-Date Mail (Running Mail)

3
The postage amount 0 is displayed on the home screen. To print postage directly
on to mail pieces:
1.
Press
2. Insert the mail piece(s) into the mail path against the rear-guide wall, with the side to
be printed facing upwards (see
The Mailing System applies postage and the mail piece (or label) is sent to the catch
tray.
Otherwise, if you want to print several identical labels:
1.
Press
Make sure the labels are available in the Label Dispenser (see
Dispenser
2.
Press
52
. System motors start running.
The side that you want to print on should be facing upwards.
If a mail piece is bigger than mail path maximum thickness (see
Mail Specifications
to print a label. The label is printed.
and enter the number of labels.
on page 76).
to print labels.
How to Use the Feeder
on page 241), press
on page 38).
before you press
Filling the Label