Generating Reports; How To Generate A Report As A User; How To Generate A Report As Supervisor - Neopost IS-5000 User Manual

OMEGA1_US.book Page 139 Vendredi, 1. octobre 2010 10:46 10

Generating Reports

6.2

Generating Reports

To generate a report, select the desired report, enter the corresponding parameters,
and choose one of the following to display or record the report:
On screen viewing
•
Print with external USB printer (if connected)
•
Print on a postage label
•
Export to a USB memory device.
•
To generate a report as a user or supervisor, follow the procedures below.

How to Generate a Report as a User

How to Generate
To generate a Report:
1
a Report as a
User
2
3
4

How to Generate a Report as Supervisor

How to Generate
To generate a Report:
1
a Report as Su-
pervisor
2
As user:
Press and type
> Reports
The list of available reports is displayed.
Select the report.
Report parameters
The
Select or type required parameters and press [OK].
Note: you can use key [C] to clear data in a field and then
type new data.
The Output selection screen is displayed.
Select an available output device.
The system sends the report to the selected output.
As supervisor (see How to Log in as Supervisor
Press and type
> Reports
Resume with the steps in
User
.
6 or select the path:
screen is displayed.
2 or select the path:
How to Generate a Report as a
6
p.190):
139