How To Select The Sealing Mode - Neopost IS-5000 User Manual

OMEGA1_US.book Page 42 Vendredi, 1. octobre 2010 10:46 10
Checking the Sealing Mode
The feeder includes a sealer that can automatically seal envelopes of mixed sizes
while processing mail.
If activated, the sealer can work in two modes:
Sealing nested (open) flaps only. It will not seal flaps that are closed flat. In this
•
mode you can mix sealed envelopes along with nested envelopes that require
3
sealing.
Sealing mixed flaps where the envelope flaps are nested and closed. All the en-
•
velopes will be sealed in this mode. You can mix nested flaps with closed flats, but
you cannot process sealed mail in this mode.
An icon on the Sealing Mode button in the user selections area of the home screen
indicates the current sealer mode:
: sealer is OFF
•
: sealer is ON. Nested envelopes and sealed envelopes.
•
: sealer is ON. Nested envelopes and closed envelopes.
•

How to Select the Sealing Mode

How to Select
the Sealing
Mode
See also
As supervisor, you can set the default sealing mode and moisture level: see
•
Default Settings
42
1
Press the Sealing Mode Button to select the mode.
2
Select a sealing mode.
3
Press the Moistening level button to select the amount of
moisture to be sprayed on the envelope flap.
p.206.
Sealer