Command Forwarding - CYBEX XP4040 Installer/User Manual

Command
Forwarding
Commands from one user can be sent to a remote user via command forwarding.
For example, Melissa is training John and needs for him to be in Follow Mode.
With Command Forwarding, Melissa can put John's system into Follow mode
from a remote location without any intervention on his part.
The following key sequences configure and control Command Forwarding. The
first sequence designates the leader console. The remaining commands are used
to enable/disable Command Forwarding and save the changes.
Key Sequence
<CM>FWD+<Enter>
<CM>FWD-<Enter>
<CM>FWD<Address>=<Command><Enter> Sends the remote sequence <Command>
Action
Enables Command Forwarding
Disables Command Forwarding
to the user card at <Address>
89