CYBEX XP4040 Installer/User Manual page 50

Searching the Channel List
Channel searching will be based on the sort order. If you are currently sorting
by Name, a search will be performed on the Name field. If Address is the current
sort field, a search will be performed on the system addresses.
To search, bring up the Channel List Menu and enable the sort method of your
choice. Next enter the first letter or number you wish to sort on. The next key
you press will add the second letter or number to your search string, and so on.
For example, if sorting by name, entering "M" will move your cursor to all
entries that begin with the letter M. Enter "A" and your cursor moves to entries
beginning with MA. Continue until you reach your desired entry.
The Administrator Control Menu
This menu contains two options for maintenance and troubeshooting: System
Management Tools and System Security Monitor. The System Management
Tools option contains six items. You can display information on the type and
revision of each module and the Flash ROM status of any applicable system
module. You can Flash upgrade your XPIQ modules as well as set the module's
date and time, reboot computers and search your system for connected units. For
more details, see "Using System Management Tools" in this chapter.
Selecting the System Security Monitor option brings up a three part window on
your monitor. From here, you can track the logging and switching history for
every system user. Active system users are listed as well as their current
selected channel. If any unauthorized activity occurs, an alert screen lists the
date, time, user and specific action. For more details, see "Using the Security
Monitor" in this chapter.
The Open Session Menu
What is Opening a Session?
When you select a device attached to an XPSI module, it is called opening a
session. The selected channel's video appears on your monitor and the channel
name is displayed in the lower right hand corner. If you open a second channel,
this new channel becomes current. The new channel name replaces the first
channel in the righthand corner, and the older channel name is displayed in one
of the three remaining blocks at the bottom of the menu. See below.
Workstation Router Network Hub 1/1 XP Moniter 0, 0
Cursor
position
Open Channels
Line 1 of 2 Active Channel
Open Channel List
44